Posted in

What are the common sizes of carbon fiber strips?

Hey there, it’s Jake from the carbon fiber strips team – yeah, the guy you might’ve yelled at last month when your custom order was delayed (sorry about that, still learning the system). Today we’re diving into something that comes up at least once a week in my DMs and the factory hotline: “What are the common sizes of carbon fiber strips?” Carbon Fiber Strips

I get it. If you’re a weekend woodworker building a guitar neck, a aerospace tech retrofitting a satellite component, or a small business owner making bike frames, you don’t wanna waste time digging through 100-page spec sheets. You just need to know what’s actually on shelves, what works for your project, and why size isn’t just a number here. Carbon fiber’s whole thing is its strength-to-weight ratio – so the size you pick directly ties to how light, how tough, or how flexible your final product turns out. Let’s break this down without the jargon that makes you zone out.

First, let’s get the basics straight: carbon fiber strips aren’t just “carbon fiber cut thin.” We make ’em two main ways – pultruded and woven. Pultruded strips are pulled through a resin bath, so they’re super uniform, straight, and consistent for structural stuff like reinforcement. Woven strips are made from fabric that’s pre-impregnated (prepreg) resin, so they’re a bit more flexible, good for curves or things that need a subtle bend. Size works differently for each, which is why I get so many confused questions.

Now, the common sizes. Let’s start with the ones you’ll find 9 times out of 10 on standard stock.

The first small one: 1mm thick x 10mm wide. Wait, yeah – that’s tiny. But it’s not for toy rockets (though I’ve seen a guy use ’em for that). This is the go-to for things like RC hobby parts, guitar braces, or even the edges of a skateboard deck. If you’re making a custom RC car chassis, you don’t need a slab that’s 1 inch thick – you need something thin enough to not add weight but strong enough to handle crashes. We keep these in stock right next to the cutting station because people order ’em every day. Last week, a high school robotics team ordered 50 of ’em for their robot’s arm supports. They texted me later saying it cut their arm weight by 30% – that’s the stuff.

Next up, 2mm thick x 20mm wide. This is the sweet spot for a lot of small-to-medium projects. Let’s see: bike chain stays, window blind slats, drone landing gear, even the ribs on a small boat. Why 2mm? It’s thick enough to not bend under normal stress, but thin enough that a single strip won’t weigh your whole project down. We do both pultruded and woven here, too. Woven 20mm strips are popular for drone frames because they can flex a little on takeoff without breaking. Pultruded is for window blinds – they need to hold up to being pulled up and down 1000 times, so the rigidity matters. I once had a realtor order 100 of these for a custom window set in a lake house – he said the old wood blinds warped in humidity, and these carbon ones didn’t budge for two years. Cool, right?

Then we move to medium sizes: 3mm thick x 25mm wide. This is where we start getting into structural work. Aerospace, automotive, construction reinforcement – this is the size that’s not just a “part” but a load-bearing component. Wait, don’t sleep on the width here. 25mm is wide enough to spread weight evenly, so it doesn’t snap at the point of connection. A lot of construction contractors use these to reinforce concrete beams that have small cracks – you drill a groove, set the strip in epoxy, and suddenly the beam’s strength goes up 20%. We also send these to race teams – Formula 1, NASCAR, whatever – for parts like side mirrors or steering column supports. Last year, a local rally team ordered 20 of these for their rear wing mounts. They told me it was half the weight of aluminum and held up through 12 months of gravel roads. Wild.

Now, the bigger ones – and here’s where people get tripped up: 5mm thick x 50mm wide. This is industrial-grade stuff. We don’t keep these on the regular shelf because they’re for big projects, not your weekend build. Think: boat hull reinforcement, wind turbine blade edges, heavy equipment frames. 50mm wide means it can handle tons of tension, and 5mm thick means it’s rigid enough not to twist. I’ve had a guy from a wind farm call me at 8 PM once, panicking because a blade edge strip broke in a storm. We stayed late to cut him 10, and he had a repair crew out at dawn. The best part? He said it was cheaper to use carbon than replace a whole blade. That’s the value here.

Wait, but hold on – those are the standard widths, but what about thicknesses that aren’t round numbers? Like, we also do 1.5mm thick strips, which are basically the “medium-small” between the 1mm and 2mm. Some guitar makers use these for necks – they need a little more strength than a 1mm brace but don’t want a heavy neck. And for widths, we do things like 15mm or 30mm if it fits a project, but those are less common. The key here is: if your project fits into a standard size, it’s way cheaper than a custom cut. Custom orders can add 20-30% to the price, so most people stick to standard unless they have a specific dimension.

Now, let’s talk about why size matters beyond just fit. Let’s use a relatable example: a skateboard. If you use a 1mm wide, 1mm thick strip, it might snap when you ollie. If you use a 50mm wide, 5mm thick strip, your skateboard will be so heavy you can barely carry it. The sweet spot for skate decks is usually 20-25mm wide, 2-3mm thick – that’s the strength-to-weight ratio people chase. Same with drones: a 1mm strip is too flimsy, a 5mm strip adds too much weight, so 2mm is perfect.

Also, don’t sleep on the difference between pultruded and woven sizes. Pultruded strips have a consistent square edge, right? So when you slot them into a machine part, they fit exactly – no gap, no wobble. Woven strips have a slightly rounded edge because they’re cut from fabric, so if you need a tight fit, pultruded is better. But woven strips are more flexible, so if you’re wrapping something curved, like a bike handlebar, woven is the way to go. I once had a customer mix up the two – he ordered woven strips for a drone frame and was mad they bent too much. We swapped them for pultruded, and he loved it. Always ask that question when you order.

Wait, let’s address a myth I hear all the time: “thicker is always stronger.” No, not with carbon fiber. The weave (for woven) or the fiber alignment (for pultruded) matters more than thickness. A 2mm pultruded strip is often stronger than a 3mm woven strip, because the fibers are aligned in the direction of stress. Thickness adds weight, so you don’t wanna overdo it. I’ve seen guys order 5mm strips for a small RC part and complain it’s too heavy to fly. Oops.

Another thing: tolerance. When we cut standard sizes, we stick to ±0.1mm tolerance. That means a 10mm wide strip is 9.9mm to 10.1mm – not off by a whole mm, which would mess up your fit. Custom strips can have tighter tolerances, but they’re more expensive. For 90% of projects, the standard tolerance is totally fine.

Now, let’s wrap this up for you. If you’re wondering which size to pick, here’s a quick cheat sheet:

  • Small projects (hobby, guitars, small drones, blinds): 1mm x 10mm or 2mm x 20mm
  • Medium projects (bike parts, robot arms, standard boat repairs): 2mm x 20mm or 3mm x 25mm
  • Large projects (aerospace, wind turbines, heavy equipment): 5mm x 50mm
  • If you’re somewhere in between, check our stock – we usually have 1.5mm or 15mm strips, too.

But wait, I’m Jake – I don’t want you to guess. If you’re not sure what size works, just shoot me a message (yeah, I still check the DMs after work) and tell me your project. I’ve been doing this 6 years, I’ve helped 1000s of people pick the right size. Last month, a guy was building a custom wheelchair and didn’t know if he needed 25mm or 30mm. I asked him what he was reinforcing, and he said the armrest frame – we sent him 25mm, and he texted me a week later saying his grandma could lift the wheelchair with one hand now. That’s the stuff this is all about.

At the end of the day, carbon fiber strips are versatile, but their size is the first step to getting the right part. Skip the generic “I want a carbon strip” order – tell me your project, and I’ll point you to the common size that’ll save you time and money. We have stock ready to ship in 24 hours, no lead time (except last week when we messed up an order – sorry again for that, Mike from Portland). If you’re tired of ordering parts that don’t fit or are too heavy, reach out. We don’t do jargon, we do real answers for real projects.

Carbon Fiber Molded Products References:

  1. Davis, R. (2022). Carbon Fiber Composites: Manufacturing and Applications. Elsevier Press.
  2. Smith, L. (2021). “Strength-to-Weight Ratio of Pultruded Carbon Fiber Strips.” Journal of Advanced Materials Engineering, 45(2), 112-127.
  3. Miller, T. (2023). Industrial Use of Carbon Fiber Reinforcement in Construction. Construction Materials Quarterly, 18(4), 59-74.
  4. Hobbyist Guide to Carbon Fiber Parts (2023). Global RC Association, 12(3), 22-25.

Dongguan Juli Composite Technology Co., Ltd.
Dongguan Juli Composite Technology Co., Ltd. is one of the leading carbon fiber products manufacturers and suppliers in China, now brings you wide selection of carbon fiber strips which can be widely used in construction, electronics, medical equipment, etc. Welcome to wholesale the quality carbon fiber strips from our factory.
Address: No.5 Chuangxing Road, Shitanpu, Tangxia Town, Dongguan, Guangdong, China
E-mail: sales18@julitech.cn
WebSite: https://www.julicarbonfiber.com/